nick1234 Posted March 6, 2018 Share Posted March 6, 2018 Hopefully this hasn't been discussed, but, my apologies if it has. I have a 2016 R1200RT. Does anyone know if the on board BT (I believe it is BT 2.0) can be updated to the latest BT 4.0 technology? Link to comment
Farkle1 Posted April 16, 2018 Share Posted April 16, 2018 (edited) I am about to do this.... Purchased a Motochello speaker bridge: [/url] and a Sena SM10: . .. Only way I could see to upgrade. I will probably run it as a wired setup direct to my Sena S20 when listening to music as I have yet to hear any bluetooth streamed music that was listenable. Will use the bluetooth when on short around town rides only for phone/radar detector. Edited April 16, 2018 by Farkle1 Link to comment
nh_handyman Posted April 24, 2018 Share Posted April 24, 2018 I'm about to join the crowd on this. There are a few videos of making the mods out there. Its my understanding that the SM10 is not going to rebroadcast bluetooth - meaning I won't pair my phone with it, then have it stream music from my phone. I will have to use a headphone jack to go from my phone to the SM10. I'll be curious about the phone call aspect through the NAV system (to my SENA intercom system). Link to comment
Bill_Walker Posted April 25, 2018 Share Posted April 25, 2018 I'm about to join the crowd on this. There are a few videos of making the mods out there. Its my understanding that the SM10 is not going to rebroadcast bluetooth - meaning I won't pair my phone with it, then have it stream music from my phone. I will have to use a headphone jack to go from my phone to the SM10. I'll be curious about the phone call aspect through the NAV system (to my SENA intercom system). As far as I know, the SM10 is a one-way device, with two wired audio sources in and one Bluetooth connection out. Mine has inputs from bike audio, via the Motochello bridge, and from my V1. The SM10 is paired with my Sena 20S helmet intercom. My phone is paired to my Navigator VI (mainly for the Garmin Link weather and traffic functions). The Navigator VI is also paired to my 20S. I can answer calls on my phone with this setup, although I do seem to have to turn up the volume on the Sena a bunch once the call connects. I haven't tried making any calls. Link to comment
strataj Posted April 25, 2018 Share Posted April 25, 2018 I'm about to join the crowd on this. There are a few videos of making the mods out there. Its my understanding that the SM10 is not going to rebroadcast bluetooth - meaning I won't pair my phone with it, then have it stream music from my phone. I will have to use a headphone jack to go from my phone to the SM10. I'll be curious about the phone call aspect through the NAV system (to my SENA intercom system). As far as I know, the SM10 is a one-way device, with two wired audio sources in and one Bluetooth connection out. Mine has inputs from bike audio, via the Motochello bridge, and from my V1. The SM10 is paired with my Sena 20S helmet intercom. My phone is paired to my Navigator VI (mainly for the Garmin Link weather and traffic functions). The Navigator VI is also paired to my 20S. I can answer calls on my phone with this setup, although I do seem to have to turn up the volume on the Sena a bunch once the call connects. I haven't tried making any calls. Bill have you looked at the volume controls in the Nav VI, it allows you to control the volume for Navigation, Phone and Media? From the main menu click on volume,click wrench, click audio mixer. I assume the Nav VI is like my Nav V Jay Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now