hogan11 Posted March 14, 2006 Share Posted March 14, 2006 Hello All! I just replaced both fork seals and one of them is still leaking. What gives! It's an 00 R1100RT w/48,500 miles. Link to comment
Ken H. Posted March 14, 2006 Share Posted March 14, 2006 Well I suppose it's rather cruel to just come out and say you blew it. But other than a miss-aligned installation, scratched slider or similar, I'm at a loss. Link to comment
SageRider Posted March 15, 2006 Share Posted March 15, 2006 Verify the air bleed screw in top cap is tight. Link to comment
hogan11 Posted March 15, 2006 Author Share Posted March 15, 2006 If there is a scratch in the surface of the tube....Does it need to be replaced? If not what else can be done? Link to comment
hogan11 Posted March 16, 2006 Author Share Posted March 16, 2006 The mystery has been solved. I put to much oil in the forks. I was given wrong info. Thanks for the replies. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.