JBryant Posted March 12, 2006 Share Posted March 12, 2006 I am confused...can someone please pass along some information on how to change the High Beam Bulb on a 2003 RT? I have the tupperware off and have replaced all the other bulbs (fog lamps and low beam) and I can see where the wiring comes out for the High Beam but I am wondering how to get the bulb out...any information would be greatly appreciated... Jeff Link to comment
Mr. Frank Posted March 13, 2006 Share Posted March 13, 2006 I found it best to sit on the floor and come at it from underneath. You'll need a pliers to grip that black plastic protrusion. It's an interference fit so you will need lots of wiggling and a fair amount of force to pull it out. I found it to be a bit of a struggle. Link to comment
wolcott Posted March 13, 2006 Share Posted March 13, 2006 Remember not to get your grimy paws on your new bulb. Go to auto parts store and get a cylinder of those cheap latex gloves. See the posts on upgraded bulbs. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.