Bud Posted March 12, 2006 Share Posted March 12, 2006 Both of my front rotors had a lot or rotational play. Stopped by Grass Roots BMW in Cape Girardeau last week and order replacement "buttons" (also called roller pins) washers and snap washers. Looked in everything I had regarding replacement and there is no mention of any kind of lube or anti-seize should be used when installing them. Anyone have advice/opinions? Link to comment
bmwmick Posted March 12, 2006 Share Posted March 12, 2006 Bud, Read through this article and BOTH addendums: http://www.ibmwr.org/ktech/floating-disk-rollers.shtml No anti-seize. Link to comment
Bud Posted March 13, 2006 Author Share Posted March 13, 2006 Bud, Read through this article and BOTH addendums: http://www.ibmwr.org/ktech/floating-disk-rollers.shtml No anti-seize. Thanks for the link. The dealer sold me all plain rollers. None with a snap ring. Though I did notice them when removing the old ones. Link to comment
bmwmick Posted March 14, 2006 Share Posted March 14, 2006 Bud, Read through this article and BOTH addendums: http://www.ibmwr.org/ktech/floating-disk-rollers.shtml No anti-seize. Thanks for the link. The dealer sold me all plain rollers. None with a snap ring. Though I did notice them when removing the old ones. Bud, Take 'em back. You need the anti-rattle bobbins (rollers) to keep them quiet. Mick Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.