rbrown99 Posted June 7, 2016 Share Posted June 7, 2016 Hello! I have a new to me 2002 R1150RS. I had to rewrap some of the wires coming from my throttle side handlebar and am not happy with the way the cables and wires are routed (I wasn't before either). Anyhow - the bike has bar backs (not sure which brand) - I just wanted to see if anyone had or could take a picture of how the cables are tied up by the handlebar and down along the right side frame. Any info would be helpful. (my cable bundle currently touches the fairing under the dash when I turn the bars hard left) Thanks again! Link to comment
rxcrider Posted June 7, 2016 Share Posted June 7, 2016 I should be able to get some for you. I have one coming in the door soon with a rough running issue. Photos will go in here: https://picasaweb.google.com/rxcrider/2002R1150RS I'll reply again when I have some added. Link to comment
rxcrider Posted June 8, 2016 Share Posted June 8, 2016 Photos added - let me know if you need something else. Link to comment
rbrown99 Posted June 8, 2016 Author Share Posted June 8, 2016 thanks rxcrider! Those pictures are great. I now see what my issue is! The PO installed bar backs which leave the brake cable and wire bundle too little room to run on the bottom of the curvy handlebar holder - so they are in front (towards front of bike) - which leads to interference with the fairing. Good stuff... I might just toss those bar backs anyway! Thanks again! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.