GordonB Posted February 20, 2013 Share Posted February 20, 2013 Greetings, I am familiar with doing the valves on the HexHeads. Is the procedure for top dead center (rotate rear wheel, look for arrow on timing chain pulley, etc.), and feeler gauging the valves the same on the CamHeads the same? Just checking gaps not trying to adjust. Thanks. Link to comment
terryofperry Posted February 20, 2013 Share Posted February 20, 2013 Here ya go: http://sanjosebmw.smugmug.com/Other/Tech-pictures/10976964_bHf66/1#!i=767209614&k=WupU9 Terry Link to comment
Highway41 Posted February 20, 2013 Share Posted February 20, 2013 Make sure your dealer gives you a copy of the valve specs if you have them do the service. Mine have moved very little since 6K. Please update your avatar with the new ride. Bill Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.