kingpinofdisks Posted August 21, 2005 Share Posted August 21, 2005 I encountered an 'oddity' at the San Diego Tech Daze on 8/20. When we removed the caps for the front and rear wheel control circuits (under the tank), we noticed that there were white mesh screens (looks like filter screens to keep out contaminants?) that we could not figure how to get out. The screens block the turkey baster hose, so we could not drain the old fluid out. Anyone know what is involved in removing the screens? Link to comment
Ken H. Posted August 21, 2005 Share Posted August 21, 2005 First I've heard of them. But I wouldn't worry about it. Just pump all the old out(adding new as you go of course) with the servos per the procedure. Link to comment
Rt4Me Posted August 22, 2005 Share Posted August 22, 2005 Just pull them out. They should just come out. When Cory and I did some bleeds we saw strainers too and just pulled them out. Bill Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.