thenok Posted August 1, 2005 Share Posted August 1, 2005 Hei! I`m new on both forum and BMW. Bought my R1100S last saturday. But i notised after a while that the cluch leveler is sett lower than the break leveler. How do i losen up the leveler and adjust it? T Link to comment
Ken H. Posted August 1, 2005 Share Posted August 1, 2005 From the bottom there are screws that remove the switch gear. On the right side there is also one in the mirror hole. Can't remember off the top of my head on the left side, but look there too. Then under that are typical bar clamp screws. BTW, welcome to the board! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.