James_H Posted February 25, 2007 Share Posted February 25, 2007 I have taken the starter apart to lubricate. It came apart with no problems. However, getting that little ring back inside it's keeper is becoming a real problem. I tried a gear puller but the jaws won't really stay around the bottom of the keeper long enough to try and press the metal ring inside. Anyone have any other suggestions on how to get the ring and keeper back together? Thanks. Jim Link to comment
Mike O Posted February 25, 2007 Share Posted February 25, 2007 Jim, There is a complete thread on this topic here including recommendations to use a slotted washer. Mike O Link to comment
James_H Posted February 25, 2007 Author Share Posted February 25, 2007 Thanks guys, That horseshoe washer trick made it really a piece of cake. Put the washer on and applied some force with the gear puller and it clicked right into place. Thanks again. Jim Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.