RoyTemple Posted August 15, 2006 Share Posted August 15, 2006 For those searching for the "Fenda Extenda" for the FRONT fender of the R1200RT, they are finally avaliable from http://www.dandyindustries.biz/ I got mine 2 weeks ago, installed it and it fits nicely. Photo attached. Link to comment
RoyTemple Posted August 16, 2006 Author Share Posted August 16, 2006 Here's another attempt to attach the photo. Link to comment
rickmoen Posted August 16, 2006 Share Posted August 16, 2006 Not a bad price! I paid about $38 plus shipping for mine. I do like the cleaner front of the engine, though. Link to comment
keithb Posted August 17, 2006 Share Posted August 17, 2006 Here is another option to the Fenda Extender. Go down to your local hardware store and buy a 6x6 malleable piece of black rubber about 1/8" thick, 2 each stainless steel screws, washers, and nuts. Then cut or trim the piece of rubber with sharp scissors to mirror the back side of the front fender. Drill two holes in each side of the rubber piece and fender. It took me about 30 minutes to make this and about $8 worth of materials. Link to comment
fla_rider Posted August 17, 2006 Share Posted August 17, 2006 Nippy Norms has had their version of this for a while. I bought one for my RT but erred in my order , got one for the ST ---->and now have an unused ST one with pkg from England. Haven't got around to the classified yet but since the subject came up///////// drop me a PM if interested. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.