Jump to content
kkm

2021 1250RT changes?

Recommended Posts

Led
15 minutes ago, wbw6cos said:

Guessing I can swap out the horn on my '19 RT for those.  Hopefully, it is plug and play.  Won't know until it shows up on parts fiche or I see them in person.   I would be curious about the current draw and how it would affect the electrical set-up.


Unfortunately, it will not be possible to put two, the satellite of the main module will not cope with such a load and will give an error. One horn works fine, whatever you want.

On the RT 21, the satellite of the main module is programmed for two horn channels, as on gtl/gt. On rt 19, only one horn channel is active.

For additional horns/headlights/other useful devices, you can use HEX ezCAN.

  • Like 1

Share this post


Link to post
wbw6cos

Sort of what I figured.  Meh.   Thanks for the informative post.

Share this post


Link to post
fourteenfour

Longer review now

 

 

Share this post


Link to post
Ponch

I saw this review earlier. I haven't ridden it, but I might agree from seeing it. It's not made for tall folks and he isn't even tall. 

Share this post


Link to post
fourteenfour
On 4/18/2021 at 6:24 PM, Ponch said:

I saw this review earlier. I haven't ridden it, but I might agree from seeing it. It's not made for tall folks and he isn't even tall. 

 

I am cramped on my 2019 because I am shorter in inseam and I want to flat foot which means I need to lower the seat but the pegs are too high which cramps me up.

 

They really need to work on the packaging but mine won't be my problem shortly.

Share this post


Link to post
Ponch
On 4/19/2021 at 5:04 PM, fourteenfour said:

 

I am cramped on my 2019 because I am shorter in inseam and I want to flat foot which means I need to lower the seat but the pegs are too high which cramps me up.

 

They really need to work on the packaging but mine won't be my problem shortly.

 

I have a different problem. 6'5 34" inseam. I had to put peg lowering kit and bar risers on my 2009 to make it work. It's it's worse than that, it's a non-starter. I wanted to like the bike and thought I would. Just didn't happen. 

Share this post


Link to post
Ron-M

I finally saw a 2021 RT in person at Asheville Eurosport during START.  It confirmed my opinion that the TFT display appears to have been just plopped onto the dash.  Integration into the dash would have enhanced the look of the motorcycle tremendously.    

  • Like 3

Share this post


Link to post
Led

Hello everyone! I want to share my opinion about the head light. I drove 200 miles in the rain at night. The new head light made me very happy. At an average speed of 70 mph, I was comfortable seeing the road. And maybe it seemed to me, but with increasing speed, the brightness of the headlight increases. At a temperature of 42F, I had to turn on only the hand heating.

 

  • Like 1

Share this post


Link to post
fourteenfour

Well it would have been nice to see how it lit the road when curves were involved and light from other vehicles was not filling the scene

Share this post


Link to post
wbw6cos

Midnight ride?

Share this post


Link to post
Led
5 hours ago, fourteenfour said:

Well it would have been nice to see how it lit the road when curves were involved and light from other vehicles was not filling the scene


I will definitely show you how the opportunity will appear.

 

5 hours ago, wbw6cos said:

Midnight ride?

 

Yes, it was a hard road. :)

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...