C b Newman Posted April 19, 2006 Share Posted April 19, 2006 Where do I cut 1 inch out of my stand when I Lower my 2004 R1150RT ? Link to comment
Trinity Posted April 19, 2006 Share Posted April 19, 2006 I had the centerstand on my '04 Adventure lowered by one inch. A local metal fab shop removed the sections from each side BELOW the reinforcing crossbar (i.e., between the crossbar and the ground). The cost was about $45 and when I got it back, it looked as if they hadn't done anything...totally professional job. FWIW, just be sure that with one inch removed, the foot, etc. won't bump on anything. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.