QDog Posted April 7, 2006 Share Posted April 7, 2006 I need to know the location of the EPA Validation Plate on a US spec ‘05 R1200RT. Customs advised that it should be located somewhere on the fender or faring. I am currently preparing my Euro-spec bike for shipment to the US and need to provide this info to my dealer. A photo would also help. -Q Link to comment
R4ND0M_AX3 Posted April 7, 2006 Share Posted April 7, 2006 I think it is one of the labels under the seat. Link to comment
Paul Mihalka Posted April 7, 2006 Share Posted April 7, 2006 I need to know the location of the EPA Validation Plate on a US spec ‘05 R1200RT. Customs advised that it should be located somewhere on the fender or faring. I am currently preparing my Euro-spec bike for shipment to the US and need to provide this info to my dealer. A photo would also help. -Q Under the seat on the fender it has a EPA noise conformity sticker. Inside the right body panel when you remove the rear seat, is a sticker about meeting federal regulations. They used to have a sticker about meeting EPA regulations and conforming to California rules, but I could not find it. WARNING: IF YOU HAVE A EURO (NON-USA) SPEC BIKE IT IS ALMOST IMPOSSIBLE TO BRING IT TO THE USA AND TITLE IT. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.