Jump to content
mneblett

2-spark Oilhead/Hexhead/Camhead COP removal

Recommended Posts

mneblett

This may already be known, but I haven't come across it before --

 

I've always found the primary coil removal tools to be awkward to use -- too easy to slip out of the coil's groove.

 

Last time I had one out, I noticed a couple fairly stout surfaces on the underside, next to the connector:

 

IMG_0713_zps01c70471.jpg

 

I found that an offset screwdriver fit perfectly for *slowly* leveraging the coil out far enough to pop the COP off the spark plug and be grab-able with fingers:

 

IMG_0710_zps3bc548ec.jpg

 

IMG_0711_zps05c98f2e.jpg

 

The tool tip should rest against the thicker parts and not on the thin connector sections, and you should concentrate on sliding the "elbow" of the offset screwdriver toward the coil body as the coil moves outward (keeps the tip next to the coil, not sliding outward to the thin connector section).

 

Offset screwdrivers are now a part of my on-board tool kits.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...