Bill Tracy Posted June 9, 2012 Share Posted June 9, 2012 There is a simple way to use an analog multimeter to read the Motronic trouble codes on R1100 Series bikes, with info at http://www.advrider.com/forums/showthread.php?t=2251. This works like a charm... my 1100RT was running rough and the trouble codes led me directly to the Hall Sensors. Such a simple trick, I had to pass it on!! Link to comment
GregsARed Posted June 12, 2012 Share Posted June 12, 2012 :clap:It can also be found on page 71 of this wonderful manual. http://www.ibmwr.org/r-tech/oilheads/R11Manual/Oilhead_Maintenance_2-25-02.pdf Link to comment
Bruce (Bedford) Posted June 12, 2012 Share Posted June 12, 2012 Dan Cata uses a LED & resistor... Say Dan can you give us a "How To For Dummys" on using a LED? With a picture or two? (I only have a digital multimeter now!) Cheers Bruce Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.