90RedRider Posted November 30, 2005 Share Posted November 30, 2005 Does anyone have suggestions for shorter centerstand, after lowering bike 1+ in. Just cutting and rewelding looks over simplified. Have to make the fit between sidestand and the piece you hook your foot on to lower it. This is a really hefty lift now. Thanks for any help, Sid Link to comment
fatbob Posted November 30, 2005 Share Posted November 30, 2005 Sid: I have'nt done this with an RT, but I did cut down the sidestand and centerstand on my Tiger after lowering the bike 1.5". I cut off the centerstand feet, cut 1" off the legs each side and welded the feet back on. It worked great. I think it is probably more complicated on an RT, everything else is! Good luck with it, Bob Link to comment
90RedRider Posted November 30, 2005 Author Share Posted November 30, 2005 Thanks Bob, that may be the most simple way to go. Then just a matter of somehow adjusting the foot push-down part to miss the side stand and come out where there is a space, which is pretty much only where it comes out originally. Sid Link to comment
bmw_rider Posted December 1, 2005 Share Posted December 1, 2005 Check this thread on the MOA forum: http://www.bmwmoa.org/forum/showthread.php?t=8454 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.