police bike

[joe flaherty]

I need help.I bought a police bike and need to add passenger seat.Hopefully someone out there has done this as parts are missing.Thanks in advance for any help.

[Woodie]

Search. $800-1500 for parts.

 

[roughwaterjohn]

Welcome aboard.

 

As far as I can tell, these are the parts needed to add a seat instead of the radio box. I've also added a link that goes through the process.

 

http://web.mac.com/djstephens/iWeb/Site/Seat%20Conversion.html

 

Part# Description Qty

 

07 11 9 900 555 BHP BOLT 2

07 11 9 900 584 FOOTPEG STUD 2

07 11 9 900 847 BOLT 2

07 11 9 900 254 BOLT W/WASHER 4

07 11 9 920 067 SCREW FILLISTER HEAD 2

07 11 9 920 148 BOLT M6X12 4

07 11 9 931 697 WASHER 2

07 11 9 945 076 COTTER PIN 2

07 12 9 900 191 HEX NUT 2

07 12 9 926 512 M6 NUT 2

46 54 2 313 319 HOLDER, LEFT 1

46 54 2 313 320 HOLDER, RIGHT 1

46 54 2 313 951 LUGG. CARRIER 1

46 54 2 315 618 PROT.CAP BLK 6

46 54 7 662 047 SUPPORT 1

46 63 1 451 276 WASHER 4

46 71 2 310 401 BUSHING 2

46 71 2 310 403 FOOT REST, LEFT 1

46 71 2 310 404 FOOT REST, RIGHT 1

46 71 2 310 871 WASHER 1

46 71 2 310 872 WASHER 1

52 53 2 313 203 CATCH 1

51 25 2 313 153 HELMET HOLDER L 1

51 25 2 313 154 HELMET HOLDER R 1

52 53 2 313 887 RUBBER SOCKET 1

52 53 2 313 888 RUBBER SOCKET 1

52 53 2 324 690 RR SEAT ADJ 1

52 53 2 325 185 LOGO REAR TAIL 1

or 52 53 7 686 463 LOGO REAR TAIL 1

52 53 2 351 970 PAINTED BLACK TAIL 1

61 13 1 372 033 CLIP NUT 4

 

**edit** Sorry, the formatting didn't come out, hope you can decipher the info from the message.

 

[ratfink]

John: Nice list.

 

This one shows a couple additional parts for the revised license plate holder.

 

[joe flaherty]

thanks for your help joe

[Woodie]

Thanks RatFink. I've thought about, but never bothered doing the full research on the conversion.

 

[ratfink]

This was the packing list. I bought the kit in 05 from Max BMW NY.

 

They were very helpful and lowest price I could find at that time, by alot. $675.00 plus shipping.

 

When I got the Strom, I use it for pillion and put the box back onthe -P.

 

I sold the kit minus a few bits for $500.00

[R1150RT_MLC_Response]

I am just about to start the conversion process. Managed to pick up all the parts through this discussion group recently. If I can do it from Australia you guys over there should be able to manage it with ease.

 

Good luck.

 

Great site with the conversion photos too.

 

Regards

 

Ian

[dc10bill]

if you want to email me dc10bill@sbcglobal.net I will email photo's of my conversion you showing how I did my 2004 1150rt-p conversion for under $175.00,(Seat) but I already had the rear foot pegs from 1985 GS-750 Suzuki only parts that one might have to find I'm sure their are many Japanese MC foot pegs will fit other than ones I used. My conversion however no rear box/trunk! as I find no way to post photo's on this site!

 

removed 67lbs from my -p that went to the land fill! I don't think the CHP ever washed the bikes what a dirt bag, they are!

[ratfink]

dc10bill:

 

Welcome to the board. Instructions for posting pictures are in the thread under Discussion board support. PM me if you need help.

 

 

[Mike2574]

R1150RT_MLC_Response

 

Hi Ian, How did you did you go about getting the bits for the conversion. I'm in Sydney and have tried all over the country side without much success. Hope it is going well, let me know.

Mike

[R1150RT_MLC_Response]

Mike

 

Parts arrived today. Am in San Antonio on business. As we say down under, "happier than a pig in sh*t".

 

I could not have been luckier. Sourced the parts through this sight in the classifieds section.

 

I travel over here a couple of times a year so if you want to try and arrange something, you could get them delivered to where I am staying over here and I could arrange to freight the parts back or bring them back with me and we could meet at the border to do the transfer. Also come to Sydney quite a bit too.

 

PM me and I will give you my email address and mobile number if you want to follow up.

 

Regards

 

Ian

[Kouros]

Just finished converting mine successfully a month ago. I picked up a complete package from a gentleman on ebay. I sent him the above list and he sent every single part (including screws, nuts, washers and bolts), well packaged to me in a few days. Cost was $350 and all the parts were in great shape. He knew exactly what was needed and I could not be happier. Make sure you ask for screws, nuts, washers and bolts. Hope this helps.

 

http://www.motografixx.com

ted@motografixx.com