jcguin Posted November 9, 2009 Share Posted November 9, 2009 Hit an 8" deep one at about 50mph the other day. Caused my rear tail lens to break off (fixed with glue), broke a tab/hook off the front of the right saddlebag (made a metal bracket to take it's place). It seems to ride just fine, but the next time I hit a decent bump it caused an oil splash on the windscreen. There was a trail from the left front fork upper rubber seal down to the brake. Like I said, it seems to be handling fine, but after I clean off the windscreen, invariably I will hit a nasty bump and spray it again. Anyone have any ideas? I thought the tele-lever put all the load on the actual shock (which appears fine) and the fork was steering only. Link to comment
Tony_K Posted November 9, 2009 Share Posted November 9, 2009 Well sounds like possible fork oil. Location seems to fit this possiblity also. I would try to avoid future potholes Link to comment
upflying Posted November 9, 2009 Share Posted November 9, 2009 Sounds like a fork seal..easy to fix. Better check the roundness of your wheels too. They are soft and bend easily. Link to comment
NonComp Posted November 9, 2009 Share Posted November 9, 2009 +1 on checking for a bent rim. They can be straightened if they are not cracked. Some Mag wheel specialists can sometimes straighten rims. Link to comment
Rinkydink Posted November 10, 2009 Share Posted November 10, 2009 +2 on the fork seal. Link to comment
lvnvbiker Posted November 10, 2009 Share Posted November 10, 2009 Classic fork seal. Easily fixed, for now grab a rag and a few zip ties and wrap up the area zip tight to the slider and looser on the stationary tube. That will stop the spray action until you can fix the seal. Link to comment
jcguin Posted November 10, 2009 Author Share Posted November 10, 2009 I think I got lucky on the rim, I had been doing alot of 2up riding recently so I was running a little higher than usual on both front and rear plus it was a graveled pothole not concrete or pavement. They had just cut through for a culvert and did a temp fill with gravel and it washed out in one spot. My saddlebag fix turned out better than the original. It is much stronger and tighter now. Link to comment
jfremder Posted November 10, 2009 Share Posted November 10, 2009 My saddlebag fix turned out better than the original. It is much stronger and tighter now. Care to post a pic so we can see your handywork? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.