Sidmariner Posted July 8, 2008 Posted July 8, 2008 The instructions for my Techlusion unit call for the adjustment of the Green, Yellow, Red and "Fuel" pots. When you look at the LEDs there are three on the right with little pads for the voltmeter probe (green, yellow, red). The pot on the upper left has no LED. There is no diagram with the instructions, so I have been assuming the other green LED on the lower left of the processor chip is the "Fuel" LED related to the upper left pot. Am I right?
Kurt Snyder Posted July 8, 2008 Posted July 8, 2008 www.techlusion.com to download the instructions. All four pots have pads for checking voltage.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.