Jump to content

help with radio install - no power


hangpilot

Recommended Posts

I am helping a friend install a radio in an 05 R1200RT with the radio prep kit. Have the necessary cable adapters per the guys at Circuit City familiar with BMWs. Pioneer CD/radio. Bike apart, plug it all in, but no power to radio with key on and also started. Not familiar with the Can-bus, seems there are no fuses to check. Don't have a voltmeter handy to see if the harness is correct, but it looks like it is the right one. Am I overlooking anything obvious?

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...