Motorcycle boots

[E30TECH]

I'd like to get a new pair of boots that give me a little extra length so I can reach the ground more comfortably.

 

There was a post about these Chippewa boots in a 'lowering an RT' thread.

 

I like the 'traditional' style boot for when I'm off the bike I dont look 'different', however I would consider other style boots.

 

I'd like to keep it within $150.

 

Can anyone help an inseam challenged brother?

[Lawman]

These will help with ground reach but might not give the protection you are looking for...

 

http://images.google.com/imgres?imgurl=h...l%3Den%26sa%3DN

 

Sorry but I just couldn't stop myself in time...

[E30TECH]

These will help with ground reach but might not give the protection you are looking for...

 

http://images.google.com/imgres?imgurl=h...l%3Den%26sa%3DN

 

Sorry but I just couldn't stop myself in time...

 

Here I am thinking "oh goodie, someone has a recommendation for me"

 

You had plenty of time to go back and edit your post

 

I'm not that freakin short!

[AdventurePoser]

Perry,

 

Have you considered finding the style of boot you like and then having a shoe repair guy add an unobtrusive "extra" sole to the bottom...This could be done to most traditional style boots, I believe.

 

I only ask this because we have a shoe guy here in town who routinely does this for folks who need a bit of height added.

 

Just a thought...good luck on your search.

 

steve in so cal

[E30TECH]

Steve -

 

I did not think of that. I didn't think there were any shoemakers around anymore. I thought they were all in China

 

I'll check the yellow pages.

 

Thanks

[johnlt]

I have the Chippewa boots and love them. Not only are they quite high but these are the most comfortable boots I own. They are insulated and summer riding is fine. The insulation works both ways. My version is not officially waterproof but did 500 miles in a good rain and stayed dry on the RT. Wading in a steam however would probably not work well. Highly recommended. I believe both Leslie and Jamie wear these and in fact, I think it was their post that convinced me to get some. Great boot.

[E30TECH]

I'm leaning towards these - I really wanted confirmation of the height and comfort

[bmwdave152]

I LOVE my Cruiserworks boots. Most comfortable ones I've ever had for the MC.

Cruiserworks boots

[E30TECH]

I LOVE my Cruiserworks boots. Most comfortable ones I've ever had for the MC.

Cruiserworks boots

 

How much taller do you feel in them?

 

Perry

[NoHeat]

There was a post about these Chippewa boots in a 'lowering an RT' thread.

 

Have you tried on common brands of workboots like Wolverine, Red Wing, etc.? They are very comfortable, as you would expect for something intended to be worn all day by people who are on their feet outdoors. They tend to have thick lugged soles that are thicker than what you find on motorcycle boots, although they won't offer as much protection as a racing-style motorcyle boot. Maybe they're not as high as the Chippewa boot in that photo, but they're easier to find.

[bmwdave152]

Probably about an inch.

[E30TECH]

Have you tried on common brands of workboots like Wolverine, Red Wing, etc.?

I have a pair of Dr Martins that are relatively comfortable, but I think I need another 3/4" or so. I was thinking that the Chippewa boots might have a little taller sole. I would buy them online as I hate going to the store

 

bmwdave152 -

 

Thanks

 

 

Maybe I'll nail some 2x4 pieces to the bottoms of my boots

[keithb]

If you go to www.chippewabootshop.com the model Leslie noted in her email is on sale through Feb. 27, 2007 for $139.95 vs. $169.95. There are also other models being promoted as well.

[E30TECH]

Thanks for the heads up on the sale.

 

I found them cheaper using froogle, and the Chippewa website says they price match, so I might wait a while (but again, I appreciate you mentioning the sale). I am going to give the boots to the wife as a birthday gift option

 

I have a few things on the list:

Marc Parnes balance

K7 Jeans with protective inserts (from the UK)

Avon Storms (front and rear, of course)

Boots

 

 

Whatever I dont get, I'll buy myself

[keithb]

I tried your froogle site and I found them for $125 w/free shipping from Bootbay.com. I sure wish they had a zipper on the side instead of laces. I get a little burned out lacing up boots when my m/c pants are getting in the way.

[E30TECH]

I think that place has the best price - they have a better return policy too (60 days).

[algover]

I would agree with Dave on the Cruiserworks. Waterproof and comfortable, and don't look like something from outer-space, like many motorcycle boots. Although they may not give you the height you want (I'm 5'5", 29" inseam).

[Bill J]

Daytona makes boots that provide more "lift". Go to www.helimot.com

[E30TECH]

Daytona makes boots that provide more "lift". Go to www.helimot.com

 

Those are a little out of my price range, but thanks for the link.

 

Although they may not give you the height you want (I'm 5'5", 29" inseam).

 

You are shorter than I am - do you have a lower saddle? I have a Sargent saddle.

[Kroref]

for the past six years I've been wearing a Matterhorn 10" boot for riding. I have found it to be the most rugged,waterproof and comfortable boot that I have found so far. Might be worth a look.

[scout6]

We purcahsed some good waterproof boots for my wife, then had them resoled as commented on earlier. It, along with a bike lowering and seat narrowing (the bike, not her) gave her good foot and ankle protection with a good boot for riding and walking. 8" bates.

[E30TECH]

Thanks for the further suggestions. I'll look into those as well.

 

The Matterhorns seem to be a bit expensive, but you usually get what you pay for.

[E30TECH]

Is there any reason to (or not to) get steel toe boots for riding? I was looking at some, and for only a few $$ more, you get steel toe.

 

I wear steel toe for work every day, so the weight is not a big deal.

[Brodyku]

Is there any reason to (or not to) get steel toe boots for riding? I was looking at some, and for only a few $$ more, you get steel toe.

 

I wear steel toe for work every day, so the weight is not a big deal.

 

As long as you don't loose the feel of the shift lever with your foot because of the steel toe. I do have one pair of Hi-Tech waterproof steel toes that I use for in town riding. When I am long distance or weekend county road riding I use BMW Savanna Boots (last pair on this page)

http://www.bmwmotorrad.co.za/bikes/news/display.asp?Id=199

[E30TECH]

I may go with the chippewa 73050 as they are insulated, steel toe, and waterproof for $140 shipped. I have been riding with steel toe Doc Martins and haven't had any issues yet. I wasn't sure of any real downside of the steel toe.

 

Those BMW Savanna Boots look like they'd be comfortable, but when I'm off the bike, I want something that 'blends' in a little more.

[Brodyku]

Those BMW Savanna Boots look like they'd be comfortable, but when I'm off the bike, I want something that 'blends' in a little more.

 

These are more for protection on longer weekends or trips since they have great protection from rocks,..etc that may hit your shin area. They are not most comfortable but are just OK for walking around and you only blend in at the Star Wars Stormtrooper convention.

[E30TECH]

and you only blend in at the Star Wars Stormtrooper convention.

[Tippy]

Quote:

--------------------------------------------------------------------------------

 

Although they may not give you the height you want (I'm 5'5", 29" inseam).

 

 

--------------------------------------------------------------------------------

 

 

 

You are shorter than I am - do you have a lower saddle? I have a Sargent saddle.

________________________________________________________

 

Guys, sorry to disillusion you, but you are tall. I believe I am the shortest guy to ride an RT at 5'3". I lowered the bike with modified Ohlins, bought a Rick Meyer low seat, and use boots that I had a shoemaker add about 3/4" to. I recommend going the shoemaker mod route, as you can select the boot that you like based on comfort, price, looks, or whatever is important to you, and then have them built up.

[E30TECH]

Well my new boots came today. I ordered the Chippewa 73050 as pictured

 

These are 8" steel toe boots with a logger sole. I did feel a little taller while staddling the RT. I noticed that I was having a hard time getting the boot under the shifter. I think this is due to the boot being an 8" rather than a 6" and it is restricting my ankle movement.

 

I'm wondering if this type of boot will break in to allow more movement in that area? I'm asking rather than trying because these were $140 and I can return them. I wore them in the garage, so the soles are already dirty and there is a little scuff from the shifter

 

Chippewa Boot

[St_Louis_Don]

I have River Road, a very similar boot. (thick toe) Even after they were broken in I found it difficult to get the toe under the shifter of my RT. I’ve developed a habit of getting just the inside ¼ of the toe under just the outer edge of the shifter.

[E30TECH]

I'm thinking that wooden piece above the sole is making the boot not flex.

 

I think I'm going to have to send them back for an exchange....

[Albert]

Perry,

You could take up river dancing. They're cloggers right? Oh, you said "logger", sorry.

[Husker Red]

I've been following this thread with interest. I have a pair of hunting boots with the thick sole, but they also have a large toe area and -like you- I've found it's tough to shift.

 

Today I'm going to stop by a shoe repair guy and see if he can take my well used Clarks and resole them with a thick sole. They fit great and have a relatively flat toe area, so even with a thicker sole I think shifting shouldn't be a problem.

 

I'll report back...

[Husker Red]

Bummer. They won't resole my old favorites because the sole is molded, not stitched.

 

Back to the drawing board.

[drodg]

Daytona makes boots that provide more "lift". Go to www.helimot.com

Well I got a pair of the Helimot boots yesterday. I ordered over the phone and they were extremely helpful. The boots are very comfortable (as they should be $$$$$$) and they give me that extra lift I need for my R1200RT inseam issue with the new seat. Thanks for everyones input!

[Carnadero]

Sorry but I just couldn't stop myself in time...

What about these?

[E30TECH]

Perry,

You could take up river dancing. They're cloggers right? Oh, you said "logger", sorry.

 

Just for that I should take a picture of me wearing these boots, and only the boots.

 

Bummer. They won't resole my old favorites because the sole is molded, not stitched.

 

I think I'll just throw some elevator insoles in my Doc Martins. I'm not really *that* short, but I'd like a little more lift. I measured my inseam by myself, but I wasn't sure if I'm supposed to....um how do I say... pull it out of the way, or measure to the bottom of it

[bakerzdosen]

What about these?

Well, that might just be better. You could simply insert the gear shift lever in the nostril and voilá! You're in business.

[Bheckel169]

I know this might seem a bit different from the typical european cut we all see, but the Cruiser Works boots that I own, are bar none, the most comfortable boots I've ever worn on a bike or walking around. A bit pricey at $250+ but they last forever, great grip on the ground and a nice thick sole which will help the vertically challenged on an RT, which I have. Doesn't have the toe shifter leather on top but the leather is such high quality I've never had any cuts or scrapes on the toe at all and it fits very easily under the shifter.

I've worn a lot of boots, but for all around comfort, rain protection, cool in the summer and excellent lightweight, protective boot, look at the Cruiserworks.

http://cruiserworks.com/products.cfm#anchor-tourboot

[E30TECH]

the Cruiser Works boots that I own, are bar none, the most comfortable boots I've ever worn on a bike or walking around.

 

Which model boot do you have?

[Bheckel169]

I have the Men's Side Zip. Really easy to bend over and slip them on and zip up. Especially good if you have a little bit of a gut, which I am losing rapidly. Good also for people with thick calves, I've been told.

[E30TECH]

Thanks for the link / info

 

I may try on some BMW boots and see how they feel first.

 

I was kinda digging the Defenders from http://cruiserworks.com/

[Petreer]

Had a pair of the very same boots, I wore them onboard ship,heavy and took a long time to break in (lotsa mink oil) had the same problem with my shifter(GS Adv 06).

Bought the Chippewa Motorcycle boot with Velcro closure and extra toe leather...very impressed! not a fan of velcro but they work excellant! I am buying an extra pair for a cross country ride planned.

Boats

[E30TECH]

The good thing about the velcro is they have no laces to take when they commit you

 

 

Those Chippewa boots are going back on Monday.

[OldBoldPilot]

Bought the Chippewa Motorcycle boot with Velcro closure and extra toe leather...very impressed! not a fan of velcro but they work excellant! I am buying an extra pair for a cross country ride planned.

Boats

 

I wonder if you're talking about the Chippewa Rally boot (style #27862). If so, I have the same boot and it's probably the most comfortable boot I've ever owned. Might be worth a look. I bought them on eBay for $158 from this seller , who was very responsive.

 

Philip

[Steve_Witmer]

Is there any reason to (or not to) get steel toe boots for riding?

 

I had a pair of Red Wings with logger sole. Tried them on the bike and hated them because of the steel toe. Too much slip and not enough feel on the shifter. They were great boots otherwise. Just the wrong tool for the job.

[ratfink]

These are more than 150.00 but you can have them custom made and you will be glad you did. Highly water resistant withpout the goretex or insulation that can make your foot cook in hot weather. Wear thick wool socks in winter.

 

Buy a less expensive bike but don't scrimp on boots or leathers.

[ratfink]

These are more than 150.00 but you can have them custom made and you will be glad you did. Highly water resistant withpout the goretex or insulation that can make your foot cook in hot weather. Wear thick wool socks in winter.

 

Buy a less expensive bike but don't scrimp on boots or leathers.

 

oops forgot the link http://www.westcoastshoe.com/wesco/

[harleyjohn45]

the Cruiser Works boots that I own, are bar none, the most comfortable boots I've ever worn on a bike or walking around.

 

Which model boot do you have?

 

 

 

+1 ON THE CRUISER WORKS

[90RedRider]

AS long as you already have some Chipewa boots , those Chip. m/c boots mentioned- the 27862 , I have some of those and they are very comfortable. Leather lined a 1st class boot. They are some what heavy and I wear them for my Harley. I like something more flexable for sport type bikes with the closer shifting quarters.