tonykuk Posted January 27, 2007 Share Posted January 27, 2007 Hi . Can anyone tell me the order in which I should bleed the brake control circuits on my 2003 RT . I have done the wheel circuits with the help of posts on this site but cannot find info on control circuit bleeding order . Link to comment
keithb Posted January 27, 2007 Share Posted January 27, 2007 Tony I tried to send the link to you without success. Send me your email address and I will forward the link to you. You can also try to find it on advrider.com. Link to comment
skinny_tom (aka boney) Posted January 27, 2007 Share Posted January 27, 2007 Hi . Can anyone tell me the order in which I should bleed the brake control circuits on my 2003 RT . I have done the wheel circuits with the help of posts on this site but cannot find info on control circuit bleeding order . I copied (with permission) the DIY from our very own Fearless Leader and her hubby. It's also around here somewhere but I don't have that link. http://www.beachbus.net/BMW/diy/Bleed_Control_Circuit.htm Print it and take it to the garage with you. Link to comment
Les is more Posted January 27, 2007 Share Posted January 27, 2007 One of the disclaimers that I hope was clearly stated in our walk through was that we recommend always having a repair manual at hand. Link to comment
Yeeha! Stephen Posted January 28, 2007 Share Posted January 28, 2007 Some good photos on the ADV site. See page 15 & 16 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.